Different Types of Wood Working Tools

assorted woodwork tools

There are lots of types of woodworking tools used at home or by carpenters. You might be looking for ideas on what kind of device you need to start your woodworking job. It might be very daunting for a beginner to choose the right tool. Well, you are in the right place where you will get to know different woodworking tools. Below, there are some of the listed tools that you can choose.

Screwdrivers

types of screw driversYou may have most likely, used or seen a screwdriver either once, twice or more times in your life. You will find it in three versions in shops, sizes of both flathead and Phillips varieties, and also many stars and square head drivers.

Chisels

It’s a critical woodworking tool. It should be finely sharpened for it’s the perfect one for removing out dirt from mortises and joints. Chisel has different sizes like half, one, three quarter and a quarter width bevel edged.

Utility Knife

Utility knife that has a locking mechanism which uses throw-away razor blades is also another essential woodworking tool that you should never miss. This sensitive tool you can use it for cleaning up a hinge mortise, for scribing a mark on a piece of wood and all other uses that can be done with a knife.

Retractable Tape Measure

It’s another vital tool that you must have in your home. To measure all the length of your cuts or also you can use it to mark where you want to fix another board. Your tape measure must have both metric and standard markings, a slightly loose hook at the end and a locking mechanism.

Claw Hammer

a claw hammerWe all must have used a hammer in our lives. You will find that there are a lot of kinds of hammers used for all types of applications. But the most important model for woodworking you should have is the claw hammer that should have slightly rounded smooth finish head. Select one that is light in weight, and comfortable to your hand. You can buy the one that is twenty Oz model.

Layout Square

It’s a precious tool by woodworkers. Layout square not only it’s the easiest and fastest device for producing a straight line in an end cut, but you can use it to mark any required measure of six inches and an angle of forty-five degrees. You can also carry it at the back of your pocket while at the work site since its small and light in weight.

Scroll To Top